Publications

2026

1. Effect of an interlayer on the microstructure and mechanical properties of explosively welded aluminum alloy-cast iron joints
   Sherpa B.B., Nishi M., Inao D., Tanaka S., Hokamoto K.
   International Journal of Advanced Manufacturing Technology, Vol. 143, No. 11-12, pp. 6269–6283, 2026.
   DOI: 10.1007/s00170-026-17809-z
2. Heat Removal Performance of a Helium Gas Flow in Unidirectional Porous Copper Pipes with Spatially Gradating Pore Structure for Nuclear Fusion Divertors
   Kubota R., Yuki K., Yuki K., Tanaka S., Hokamoto K.
   Fusion Science and Technology, Vol. 82, No. 1-2, pp. 203–211, 2026.
   DOI: 10.1080/15361055.2025.2515324
3. High-velocity impact bonding of aluminum sheet to ceramic substrate via Vaporizing Foil Actuator
   Yamane R., Nishi M., Hamashima H., Terasaki H., Tokuda M., Hokamoto K., Tanaka S.
   Journal of Materials Research and Technology, Vol. 41, pp. 1765–1775, 2026.
   DOI: 10.1016/j.jmrt.2025.12.298
4. Influence of Manufacturer-Dependent Variations in Plate and Peg Properties on Friction Sensitivity Results
   Katoh K., Higashi E., Imahayashi A., Tanaka S., Okada K., Moriyama S.
   Propellants, Explosives, Pyrotechnics, Vol. 51, No. 1, pp. 120–126, 2026.
   DOI: 10.1002/prep.70069
5. Local Structures of Se and Br in Cretaceous–Paleogene Boundary Sediments and Concentration Effects of Ferrihydrite Originating From Impact Ejecta
   Murai K.-I., Yoshiasa A., Kitahara G., Tokuda M., Ishimaru S., Moriga T.
   Geological Journal, 2026.
   DOI: 10.1002/gj.70393
6. Pulsed plasma in liquid synthesis of nickel nanoparticles: solvent-dependent phase evolution from carbon-dissolved fcc-Ni to Ni₃C
   Tokuda M., Nakanishi R., Morinaga S., Yoda S., Tanaka S.
   Journal of Nanoparticle Research, Vol. 28, No. 1, Article 1, 2026.
   DOI: 10.1007/s11051-025-06518-5
7. The Combined Influence of the Detonator Position and Anvil Type on the Weld Quality of Explosively Welded A1050/AZ31 Joints
   Sherpa B.B., Harada S., Somasundaram S., Tanaka S., Hokamoto K.
   Metals, Vol. 16, No. 1, Article 128, 2026.
   DOI: 10.3390/met16010128

2025

1. Bonding nature of Cu2+ in distorted tetragonal pyramidal coordination in clinoclase and callaghanite
   Misawa M., Yoshiasa A., Shimojo F., Tokuda M., Ishimaru S., Kitahara G., Sugiyama K.
   Journal of Mineralogical and Petrological Sciences, Vol. 120, No. 1, Article 007, 2025.
   DOI: 10.2465/JMPS.240925
2. Cr5B3 with the Shastry-Sutherland lattices
   Tokuda M., Yubuta K., Shishido T., Sugiyama K.
   Acta Crystallographica Section E: Crystallographic Communications, Vol. 81, No. Pt 8, pp. 748–752, 2025.
   DOI: 10.1107/S2056989025006437
3. Distribution of Eu and Er in Ca9RE(PO4)7 phosphors analyzed by anomalous X-ray scattering
   Hiraoka K., Yamane R., Tokuda M., Sugiyama K.
   Journal of Crystal Growth, Vol. 650, Article 127955, 2025.
   DOI: 10.1016/j.jcrysgro.2024.127955
4. Effect of Shock Loading on ω Phase Formation in Pre-Strained Pure Titanium
   Horita Z., Masuda T., Tanaka S., Tokuda M., Hokamoto K., Shiraishi T., Kiguchi T.
   Materials Transactions, Vol. 66, No. 5, pp. 584–589, 2025.
   DOI: 10.2320/matertrans.MT-MC2024020
5. Interface behavior and mechanical properties of explosively welded aluminum alloys and cast irons
   Sherpa B.B., Izumi Y., Inao D., Tanaka S., Hokamoto K.
   Materials Today Communications, Vol. 42, Article 111536, 2025.
   DOI: 10.1016/j.mtcomm.2025.111536
6. Intrinsic strength of diamond by shock-compression measurement of large and pure single crystals
   Mashimo T., Liu X., Tokuda M., Kawai N., Isobe H., Tsushida M., Yamamuro T., Kurio F., Sumiya H.
   Physical Review B, Vol. 112, No. 22, pp. 2241111–2241119, 2025.
   DOI: 10.1103/gs3m-hbb4
7. Investigation of impact properties in unidirectional porous metals fabricated via cylindrical explosion compression
   Sherpa B.B., Sunaba D., Kuroda M., Inao D., Tanaka S., Hokamoto K.
   Materials Today Communications, Vol. 44, Article 111957, 2025.
   DOI: 10.1016/j.mtcomm.2025.111957
8. Mechanical bonding of dissimilar materials via anchor-based interfacial interlocking
   Hasegawa K., Nishida T., Kasamura K., Kubota A., Terasaki H., Hokamoto K., Tanaka S.
   Journal of Materials Research and Technology, Vol. 39, pp. 6263–6274, 2025.
   DOI: 10.1016/j.jmrt.2025.10.127
9. Quasi-static and impact behaviour of polymer-metal interpenetrating phase TPMS composites
   Novak N., Al-Ketan O., Mauko A., Krstulović-Opara L., Tanaka S., Borovinšek M., Vihar B., Maver U., Hokamoto K., Vesenjak M., Ren Z.
   Composite Structures, Vol. 366, Article 119225, 2025.
   DOI: 10.1016/j.compstruct.2025.119225
10. Smoothing of large-area copper foils using underwater shock waves: an experimental study and numerical simulation on the effects of shock wave duration on the process
    Naya T., Tanaka S., Hasegawa K., Tokuda M., Kasamura K., Kubota A., Hokamoto K.
    International Journal of Advanced Manufacturing Technology, Vol. 139, No. 3, pp. 1831–1842, 2025.
    DOI: 10.1007/s00170-025-15981-2
11. Suppression of irradiation hardening in tungsten-coated ferritic steel for fusion reactor blanket applications
    Seki K., Yoshida K., Miyata H., Hasegawa A., Kondo S., Yu H., Ogino Y., Hokamoto K., Tanaka S., Koyanagi T., Kasada R.
    Journal of Nuclear Materials, Vol. 607, Article 155657, 2025.
    DOI: 10.1016/j.jnucmat.2025.155657

2024

1. Characteristics of ejecta resulting from hypervelocity impact on Al/Mg explosive welding clad materials
   Su Z., Masaki M., Nishida M., Kawase M., Hokamoto K., Inao D.
   International Journal of Impact Engineering, Vol. 186, Article 104869, 2024.
   DOI: 10.1016/j.ijimpeng.2023.104869
2. Chemical composition, crystal structure and spontaneous polarization of swedenborgite
   Murai K., Yoshiasa A., Ishimaru S., Yoshihara M., Kitahara G., Tokuda M., Hongu H., Momma K., Sugiyama K.
   Journal of Mineralogical and Petrological Sciences, Vol. 119, No. 1, Article 017, 2024.
   DOI: 10.2465/JMPS.240209
3. Development of joining technology between FeCrAl alloys and fusion reactor piping materials
   Kanai R., Naoko O., Inao D., Nagasaka T., Hokamoto K.
   Materials Research Proceedings, Vol. 44, pp. 691–697, 2024.
   DOI: 10.21741/9781644903254-74
4. Explosive Welding of Aluminum and Cast Iron for Potential Transportation and Structural Applications
   Sherpa B.B., Yu M., Inao D., Tanaka S., Hokamoto K.
   Advanced Engineering Materials, Vol. 26, No. 1, Article 2301389, 2024.
   DOI: 10.1002/adem.202301389
5. Metal Forming Using Underwater Shock Waves and Polymer Molds
   Tanaka S., Hasegawa K.
   The Review of High Pressure Science and Technology, Vol. 34, No. 4, pp. 165–173, 2024.
   DOI: 10.4131/jshpreview.34.165
6. The effect of interfacial morphology and weldability window on tin and aluminum plates welded using regulated water shockwaves
   Satyanarayan, Hokamoto K., Tanaka S., Mori A., Inao D.
   Welding in the World, Vol. 68, No. 11, pp. 2941–2951, 2024.
   DOI: 10.1007/s40194-024-01834-1
7. Underwater Explosive Welding of Tin and Nickel Plates and Characterization of Their Interfaces
   Machaiah K.R., Tanaka S., Inao D., Hokamoto K., Satyanarayan
   Advanced Joining Technologies, pp. 1–17, 2024.
   DOI: 10.1201/9781003327769-1
8. Uniformity of planar shock waves generated by vaporizing foil actuator and its application to microfabrication
   Hasegawa K., Tanaka S., Kasamura K., Novak N., Kubota A., Hokamoto K.
   International Journal of Advanced Manufacturing Technology, Vol. 133, No. 11-12, pp. 5991–6003, 2024.
   DOI: 10.1007/s00170-024-14095-5

2023

1. Acceleration of metal plates by hybridization of electrical and chemical energy for potential application in high-velocity impact welding
   Kawano R., Tanaka S., Inao D., Hokamoto K.
   Journal of Materials Processing Technology, Vol. 318, Article 118014, 2023.
   DOI: 10.1016/j.jmatprotec.2023.118014
2. Crystal structures of rhodium-containing erlichmanite-laurite solid solutions (Os 1-x-y Ru x Rh y S 2: X = 0.09-0.60, y = 0.07-0.10) with unique compositional dependence
   Kitahara G., Yoshiasa A., Ishimaru S., Terai K., Tokuda M., Nishio-Hamane D., Tanaka T., Sugiyama K.
   Mineralogical Magazine, Vol. 87, No. 3, pp. 396–406, 2023.
   DOI: 10.1180/mgm.2022.139
3. Determination of orientational ordering of hydroxy groups in kulanite between 120–353 K using single–crystal X–ray diffraction
   Yamane R., Tokuda M., Sugiyama K.
   Journal of Mineralogical and Petrological Sciences, Vol. 118, No. 1, Article 003, 2023.
   DOI: 10.2465/jmps.220701
4. Dynamic compression of a polymer stamper using high-impulse underwater shock waves to imprint a sub-micrometer structure on a metal plate surface
   Hasegawa K., Tanaka S., Inao D., Nishi M., Kubota A., Hokamoto K.
   Journal of Materials Research and Technology, Vol. 24, pp. 6730–6738, 2023.
   DOI: 10.1016/j.jmrt.2023.04.248
5. Effect of Experimental Parameters on the Size of Wavy Interface in Multi layered Material Made By Single-Shot Explosive Bonding Technique
   Hokamoto K., Fujtta M., Chiba A., Yamamori M.
   Shock Wave and High-Strain-Rate Phenomena in Materials, pp. 1121–1130, 2023.
   DOI: 10.1201/9781003418146-107
6. Experimental investigation of impact close to the edge of boulders
   Kadono T., Nakamura A.M., Suetsugu R., Chang D., Shiramizu S., Takatsu I., Ogawa K., Nomura K., Nagaashi Y., Murakami Y., Yamasaki Y., Shiomoto J., Okamoto T., Tanaka S., Kawai N.
   Planetary and Space Science, Vol. 236, Article 105763, 2023.
   DOI: 10.1016/j.pss.2023.105763
7. Formation of intermetallic and its effect on the hardening of welding joint between vanadium alloy and Hastelloy X alloy after heat treatment
   Jiang S., Shen J., Nagasaka T., Muroga T., Sagara A., Ohnuki S., Hokamoto K., Rao W., Tanaka S., Inao D., Morizono Y., Kasada R., Zheng P.
   Nuclear Materials and Energy, Vol. 34, Article 101389, 2023.
   DOI: 10.1016/j.nme.2023.101389
8. High strain rate mechanical behaviour of uniform and hybrid metallic TPMS cellular structures
   Novak N., Tanaka S., Hokamoto K., Mauko A., Yilmaz Y.E., Al-Ketan O., Vesenjak M., Ren Z.
   Thin-Walled Structures, Vol. 191, Article 111109, 2023.
   DOI: 10.1016/j.tws.2023.111109
9. Hot Shock Consolidation of Diamond and Cubic Boron Nitride Powders
   Hokamoto K., Shang S.S., Yu L.H., Meyers M.A.
   Shock Wave and High-Strain-Rate Phenomena in Materials, pp. 453–462, 2023.
   DOI: 10.1201/9781003418146-41
10. Impact loading of additively manufactured metallic stochastic sheet-based cellular material
    Novak N., Al-Ketan O., Mauko A., Yilmaz Y.E., Krstulović-Opara L., Tanaka S., Hokamoto K., Rowshan R., Al-Rub R.A., Vesenjak M., Ren Z.
    International Journal of Impact Engineering, Vol. 174, Article 104527, 2023.
    DOI: 10.1016/j.ijimpeng.2023.104527
11. Investigation of interfacial microstructure and mechanical characteristics of Ti/SS316 clads fabricated by explosive welding process
    Sherpa B.B., Kuroda M., Ikeda T., Kawamura K., Inao D., Tanaka S., Hokamoto K.
    International Journal of Advanced Manufacturing Technology, Vol. 128, No. 3-4, pp. 1403–1418, 2023.
    DOI: 10.1007/s00170-023-12010-y
12. Quantification and Maximization of Shockwave during Aluminum Wire Explosion
    Eguchi T., Inoue T., Matsuda M., Tanaka S., Wang D., Namihira T.
    2023 IEEE 24th International Conference on Pulsed Power (PPC), 2023.
    DOI: 10.1109/PPC47928.2023.10310839
13. Redetermination of the crystal structure of yttrium chromium tetraboride, YCrB4, from single-crystal X-ray diffraction data
    Tokuda M., Yubuta K., Shishido T., Sugiyama K.
    Acta Crystallographica Section E: Crystallographic Communications, Vol. 79, No. Pt 11, pp. 1072–1075, 2023.
    DOI: 10.1107/S2056989023008952
14. Syntheses and structures of ammonium transition-metal dialuminium tris(phosphate) dihydrates (NH4)MAl4(PO4)3·2H2O (M = Mn and Ni)
    Tokuda M., Tanaka K., Sugiyama K.
    Acta Crystallographica Section E: Crystallographic Communications, Vol. 79, pp. 116–119, 2023.
    DOI: 10.1107/S2056989023000555
15. Syntheses, single crystal structure analyses and ultraviolet light emission of CaW1−xMoxO4 (x = 0.0–1.0) scheelite–powellite solid solutions
    Murai K., Yamashita K., Kitahara G., Tokuda M., Yoshiasa A.
    Journal of Mineralogical and Petrological Sciences, Vol. 118, No. 1, Article 9, 2023.
    DOI: 10.2465/jmps.220901

2022

1. An Experimental and Numerical Simulation Study of Single Particle Impact during Detonation Spraying
   Riabinkina P.A., Bataev I.A., Batraev I.S., Ruktuev A.A., Ulianitsky V.Yu., Tanaka S., Emurlaeva Y.Yu., Ogneva T.S., Bataev V.A.
   Metals, Vol. 12, No. 6, Article 1013, 2022.
   DOI: 10.3390/met12061013
2. Crystal structure, XANES and charge distribution investigation of krennerite and sylvanite: analysis of Au - Te and Te - Te bonds in Au1-xAgxTe2group minerals
   Kitahara G., Yoshiasa A., Tokuda M., Nespolo M., Hongu H., Momma K., Miyawaki R., Sugiyama K.
   Acta Crystallographica Section B: Structural Science, Crystal Engineering and Materials, Vol. 78, pp. 117–132, 2022.
   DOI: 10.1107/S2052520622000804
3. Heat transfer and pressure drop correlations for a gas flow in unidirectional porous copper tubes
   Kibushi R., Yuki K., Unno N., Tanaka S., Hokamoto K.
   International Journal of Heat and Mass Transfer, Vol. 195, Article 123123, 2022.
   DOI: 10.1016/j.ijheatmasstransfer.2022.123123
4. Heat Transfer Potential of Unidirectional Porous Tubes for Gas Cooling under High Heat Flux Conditions
   Yuki K., Kibushi R., Kubota R., Unno N., Tanaka S., Hokamoto K.
   Energies, Vol. 15, No. 3, Article 1042, 2022.
   DOI: 10.3390/en15031042
5. Improving the Efficiency and Antioxidant Activity of Essential Oil Extraction from Abies sachalinensis by Underwater Shockwave Pretreatment for the Construction of Low-Energy and Sustainable Essential Oil Extraction System
   Kawai H., Kuraya E., Touyama A., Higa O., Tokeshi K., Tsujikawa Y., Hokamoto K., Itoh S.
   Processes, Vol. 10, No. 12, Article 2534, 2022.
   DOI: 10.3390/pr10122534
6. Inhomogeneity of Plastic Flow Accompanying Rapid Loading of Metallic Materials
   Ryabinkina P.A., Emurlaeva Y.Y., Bataev I.A., Tanaka S.
   Metal Science and Heat Treatment, Vol. 63, No. 11-12, pp. 674–680, 2022.
   DOI: 10.1007/s11041-022-00747-4
7. Mechanical Properties of Explosion-Welded Titanium/Duplex Stainless Steel under Different Energetic Conditions
   Wang K., Kuroda M., Chen X., Hokamoto K., Li X., Zeng X., Nie S., Wang Y.
   Metals, Vol. 12, No. 8, Article 1354, 2022.
   DOI: 10.3390/met12081354
8. Mechanism Elucidation of High-Pressure Generation in Cellular Metal at High-Velocity Impact
   Nishi M., Tanaka S., Mori A., Vesenjak M., Ren Z., Hokamoto K.
   Metals, Vol. 12, No. 1, Article 128, 2022.
   DOI: 10.3390/met12010128
9. Optimal parameters for the explosive welding of TP 270C pure titanium and SUS 821L1 duplex stainless steel
   Chen X., Inao D., Li X., Tanaka S., Li K., Hokamoto K.
   Journal of Materials Research and Technology, Vol. 19, pp. 4771–4786, 2022.
   DOI: 10.1016/j.jmrt.2022.07.031
10. Redetermination of the crystal structures of rareearth trirhodium diboride RERh3B2(RE = Pr, Nd and Sm) from single-crystal X-ray data
    Tokuda M., Yubuta K., Shishido T., Sugiyama K.
    Acta Crystallographica Section E: Crystallographic Communications, Vol. 78, pp. 76–79, 2022.
    DOI: 10.1107/S2056989021013311
11. Single-crystal structure refinements and Debye temperatures of Ir2S3 kashinite and Rh2S3 bowieite
    Yoshiasa A., Kitahara G., Tokuda M., Ishimaru S., Ono S.I., Terai K., Nakatsuka A., Sugiyama K.
    Acta crystallographica. Section C, Structural chemistry, Vol. 78, pp. 606–611, 2022.
    DOI: 10.1107/S2053229622009603
12. Study on High-Strain-Rate Deformation of Magnesium Alloy Using Underwater Shock Waves Generated by High-Voltage Electric Discharge of Thin Wire
    Iyama H., Yamaguchi H., Nishi M., Higa Y.
    Metals, Vol. 12, No. 11, Article 1939, 2022.
    DOI: 10.3390/met12111939
13. Toward a Better Understanding of Shock Imprinting with Polymer Molds Using a Combination of Numerical Analysis and Experimental Research
    Hasegawa K., Tanaka S., Bataev I., Inao D., Nishi M., Kubota A., Hokamoto K.
    Materials, Vol. 15, No. 5, Article 1727, 2022.
    DOI: 10.3390/ma15051727

2021

1. Basic issues in explosion and other high-rate processing of materials
   Hokamoto K., Hamashima H.
   Explosion, Shock-Wave and High-Strain-Rate Phenomena of Advanced Materials, pp. 1–16, 2021.
   DOI: 10.1016/B978-0-12-821665-1.00005-5
2. Behavior of materials under extremely high-velocity oblique impact
   Bataev I., Mori A., Hokamoto K.
   Explosion, Shock-Wave and High-Strain-Rate Phenomena of Advanced Materials, pp. 71–92, 2021.
   DOI: 10.1016/B978-0-12-821665-1.00006-7
3. Bonding strength evaluation of explosive welding joint of tungsten to ferritic steel using ultra-small testing technologies
   Wu X., Kondo S., Yu H., Okuno Y., Ando M., Kurotaki H., Tanaka S., Hokamoto K., Ochiai R., Konishi S., Kasada R.
   Materials Science and Engineering: A, Vol. 826, Article 141995, 2021.
   DOI: 10.1016/j.msea.2021.141995
4. Characterization of shock wave damages in explosion welded mo/cu clads
   Parchuri P.K., Kotegawa S., Ito K., Yamamoto H., Mori A., Tanaka S., Hokamoto K.
   Metals, Vol. 11, No. 3, pp. 1–13, 2021.
   DOI: 10.3390/met11030501
5. Comparison of explosive welding of pure titanium/SUS 304 austenitic stainless steel and pure titanium/SUS 821L1 duplex stainless steel
   CHEN X., INAO D., TANAKA S., LI X.-J., BATAEV I.A., HOKAMOTO K.
   Transactions of Nonferrous Metals Society of China (English Edition), Vol. 31, No. 9, pp. 2687–2702, 2021.
   DOI: 10.1016/S1003-6326(21)65685-6
6. Crystal structure refinement and crystal chemistry of parasymplesite and vivianite
   Hongu H., Yoshiasa A., Kitahara G., Miyano Y., Han K., Momma K., Miyawaki R., Tokuda M., Sugiyama K.
   Journal of Mineralogical and Petrological Sciences, Vol. 116, No. 4, pp. 183–192, 2021.
   DOI: 10.2465/JMPS.200904
7. Crystal structure refinements of stoichiometric Ni3Se2 and NiSe
   Unoki K., Yoshiasa A., Kitahara G., Nishiayama T., Tokuda M., Sugiyama K., Nakatsuka A.
   Acta Crystallographica Section C: Structural Chemistry, Vol. 77, pp. 169–175, 2021.
   DOI: 10.1107/S2053229621002187
8. Crystal synthesis and Debye temperature determination of PdSb2: Usefulness of single crystal precise structure analysis
   Yoshiasa A., Tokuda M., Kitahara G., Unoki K., Isobe H., Nakatsuka A., Sugiyama K.
   Journal of Crystal Growth, Vol. 574, Article 126327, 2021.
   DOI: 10.1016/j.jcrysgro.2021.126327
9. Distribution of Ce in orthophosphate Sr3(PO4)2
   Tokuda M., Kodama Y., Niiyama S., Shinoda K., Sugiyama K.
   Journal of Crystal Growth, Vol. 571, Article 126267, 2021.
   DOI: 10.1016/j.jcrysgro.2021.126267
10. Effect of sintering pressure and temperature on structure and properties of Ni–Al metal-intermetallic composites produced by SPS
    Ogneva T.S., Bataev I.A., Mali V.I., Anisimov A.G., Lazurenko D.V., Popelyukh A.I., Emurlaeva Y.Y., Bataev A.A., Tanaka S., Yegoshin K.D.
    Materials Characterization, Vol. 180, Article 111415, 2021.
    DOI: 10.1016/j.matchar.2021.111415
11. Explosion, Shock-Wave and High-Strain-Rate Phenomena of Advanced Materials: A volume in Multiphysics: Advances and Applications
    Hokamoto K.
    Explosion, Shock-Wave and High-Strain-Rate Phenomena of Advanced Materials, pp. 1–158, 2021.
    DOI: 10.1016/B978-0-12-821665-1.00010-9
12. Explosive forming
    Iyama H., Nishi M., Tanaka S.
    Explosion, Shock-Wave and High-Strain-Rate Phenomena of Advanced Materials, pp. 17–34, 2021.
    DOI: 10.1016/B978-0-12-821665-1.00004-3
13. Explosive welding
    Mori A., Bataev I., Wada N., Hokamoto K.
    Explosion, Shock-Wave and High-Strain-Rate Phenomena of Advanced Materials, pp. 35–70, 2021.
    DOI: 10.1016/B978-0-12-821665-1.00002-X
14. Explosive welding of dissimilar metals for various light metals
    Hokamoto K.
    Keikinzoku/Journal of Japan Institute of Light Metals, Vol. 71, No. 8, pp. 400–405, 2021.
    DOI: 10.2464/jilm.71.400
15. Fabrication of cellular materials with explosive welding
    Nishi M., Hokamoto K., Vesenjak M., Renc Z.
    Explosion, Shock-Wave and High-Strain-Rate Phenomena of Advanced Materials, pp. 93–108, 2021.
    DOI: 10.1016/B978-0-12-821665-1.00003-1
16. Graphene formation through pulsed wire discharge of graphite strips in water: Exfoliation mechanism
    Tanaka S., Inao D., Hasegawa K., Hokamoto K., Chen P., Gao X.
    Nanomaterials, Vol. 11, No. 5, Article 1223, 2021.
    DOI: 10.3390/nano11051223
17. Improved yield and antioxidant activity of essential oil from Alpinia zerumbet (Zingiberaceae) leaves by underwater shockwave pretreatment
    Kawai H., Kuraya E., Touyama A., Higa O., Hokamoto K., Tokeshi K., Yasuda A., Naragaki T., Itoh S.
    Food and Bioproducts Processing, Vol. 125, pp. 134–140, 2021.
    DOI: 10.1016/j.fbp.2020.11.003
18. Mechanical behavior of cellular materials-from quasistatic to high strain rate impact response
    Novak N., Vesenjak M., Nishi M., Tanaka S., Hokamoto K., Ren Z.
    Explosion, Shock-Wave and High-Strain-Rate Phenomena of Advanced Materials, pp. 109–154, 2021.
    DOI: 10.1016/B978-0-12-821665-1.00001-8
19. One-dimensional nanoimprinting using linear explosives
    Hasegawa K., Tanaka S., Bataev I., Inao D., Nishi M., Kubota A., Hokamoto K.
    Materials and Design, Vol. 203, Article 109607, 2021.
    DOI: 10.1016/j.matdes.2021.109607
20. On the texture and superstructure formation in Ti–TiAl3–Al MIL composites
    Emurlaeva Y.Y., Ivanov I.V., Lazurenko D.V., Ogneva T.S., Chen P., Zhou Q., Bataev A.A., Ruktuev A.A., Tanaka S., Bataev I.A.
    Intermetallics, Vol. 135, Article 107231, 2021.
    DOI: 10.1016/j.intermet.2021.107231
21. Preface
    Hokamoto K.
    Explosion, Shock-Wave and High-Strain-Rate Phenomena of Advanced Materials, pp. xv–xvi, 2021.
    DOI: 10.1016/B978-0-12-821665-1.00008-0
22. Straightforward synthesis of silicon vacancy (SiV) center-containing single-digit nanometer nanodiamonds via detonation process
    Makino Y., Mahiko T., Liu M., Tsurui A., Yoshikawa T., Nagamachi S., Tanaka S., Hokamoto K., Ashida M., Fujiwara M., Mizuochi N., Nishikawa M.
    Diamond and Related Materials, Vol. 112, Article 108248, 2021.
    DOI: 10.1016/j.diamond.2021.108248
23. Study of explosive welding of A6061/SUS821L1 using interlayers with different thicknesses and the air shockwave between plates
    Chen X., Li X., Inao D., Tanaka S., Hokamoto K.
    International Journal of Advanced Manufacturing Technology, Vol. 116, No. 11-12, pp. 3779–3794, 2021.
    DOI: 10.1007/s00170-021-07755-3
24. Sub-micrometer and nanoscale imprinting on large-area foils using high-pressure underwater shock waves
    Tanaka S., Hasegawa K., Bataev I., Kubota A., Hokamoto K.
    Materials and Design, Vol. 198, Article 109341, 2021.
    DOI: 10.1016/j.matdes.2020.109341
25. Synthesis of cubic and monoclinic hafnia nanoparticles by pulsed plasma in liquid method
    Ma W., Mashimo T., Tokuda M., Tamura S., Yoda S., Tsushida M., Isobe H., Yoshiasa A.
    Ceramics International, Vol. 47, No. 24, pp. 33988–33996, 2021.
    DOI: 10.1016/j.ceramint.2021.08.306
26. Ultralarge-area shock imprinting using underwater shock wave and natural leaf mold
    Tanaka S., Inao D., Bataev I., Kubota A., Hokamoto K.
    Manufacturing Letters, Vol. 27, pp. 8–12, 2021.
    DOI: 10.1016/j.mfglet.2020.11.004

2020

1. An experimental and computational study of the high-velocity impact of low-density aluminum foam
   Borovinšek M., Vesenjak M., Hokamoto K., Ren Z.
   Materials, Vol. 13, No. 8, Article 1949, 2020.
   DOI: 10.3390/MA13081949
2. Cerium oxide (CeO2-x) nanoparticles with high Ce3+ proportion synthesized by pulsed plasma in liquid
   Ma W., Mashimo T., Tamura S., Tokuda M., Yoda S., Tsushida M., Koinuma M., Kubota A., Isobe H., Yoshiasa A.
   Ceramics International, Vol. 46, No. 17, pp. 26502–26510, 2020.
   DOI: 10.1016/j.ceramint.2020.07.093
3. Cladding of a crack-free W plate on Cu plates using explosive welding at higher collision velocity with lower collision angle
   Parchuri P.K., Kotegawa S., Ito K., Yamamoto H., Mori A., Tanaka S., Hokamoto K.
   Results in Materials, Vol. 5, Article 100023, 2020.
   DOI: 10.1016/j.rinma.2019.100023
4. Compressive behaviour of chiral auxetic cellular structures at different strain rates
   Novak N., Vesenjak M., Tanaka S., Hokamoto K., Ren Z.
   International Journal of Impact Engineering, Vol. 141, Article 103566, 2020.
   DOI: 10.1016/j.ijimpeng.2020.103566
5. Control of thermophysical properties of langasite-type La3Ta0.5Ga5.5O14 crystals for pressure sensors
   Usui H., Tokuda M., Sugiyama K., Hoshina T., Tsurumi T., Lebbou K., Yanase I., Takeda H.
   Crystals, Vol. 10, No. 10, pp. 1–9, 2020.
   DOI: 10.3390/cryst10100936
6. Development of unidirectional cellular structure with multiple pipe layers and characterisation of its mechanical properties
   Vesenjak M., Nakashima Y., Hokamoto K., Ren Z., Marumo Y.
   Materials, Vol. 13, No. 17, pp. 1–14, 2020.
   DOI: 10.3390/MA13173880
7. Experimental and computational analysis of the uni-directional porous (UniPore) copper mechanical response at high-velocity impact
   Nishi M., Tanaka S., Vesenjak M., Ren Z., Hokamoto K.
   International Journal of Impact Engineering, Vol. 136, Article 103409, 2020.
   DOI: 10.1016/j.ijimpeng.2019.103409
8. Explosive welding of Al alloys and high strength duplex stainless steel by controlling energetic conditions
   Chen X., Inao D., Tanaka S., Mori A., Li X., Hokamoto K.
   Journal of Manufacturing Processes, Vol. 58, pp. 1318–1333, 2020.
   DOI: 10.1016/j.jmapro.2020.09.037
9. Explosive welding of thin aluminum plate onto magnesium alloy plate using a gelatin layer as a pressure-transmitting medium
   Inao D., Mori A., Tanaka S., Hokamoto K.
   Metals, Vol. 10, No. 1, Article 106, 2020.
   DOI: 10.3390/met10010106
10. Fabrication and mechanical properties of rolled aluminium unidirectional cellular structure
    Vesenjak M., Nishi M., Nishi T., Marumo Y., Krstulović-Opara L., Ren Z., Hokamoto K.
    Metals, Vol. 10, No. 6, pp. 1–12, 2020.
    DOI: 10.3390/met10060770
11. Fabrication of composite unidirectional cellular metals by using explosive compaction
    Nishi M., Tanaka S., Vesenjak M., Ren Z., Hokamoto K.
    Metals, Vol. 10, No. 2, Article 193, 2020.
    DOI: 10.3390/met10020193
12. Initiation of nitromethane deflagration promoted by the oxidation reaction of vaporized metal wire
    Tanaka S., Bataev I., Inao D., Hokamoto K.
    Applications in Energy and Combustion Science, Vol. 1-4, Article 100005, 2020.
    DOI: 10.1016/j.jaecs.2020.100005
13. Interfacial characterization of dissimilar-metals bonding between vanadium alloy and Hastelloy X alloy by explosive welding
    Jiang S., Shen J., Nagasaka T., Muroga T., Sagara A., Ohnuki S., Hokamoto K., Tanaka S., Inao D., Morizono Y., Kasada R., Zheng P.
    Journal of Nuclear Materials, Vol. 539, Article 152322, 2020.
    DOI: 10.1016/j.jnucmat.2020.152322
14. Simultaneous Initiation of Nitromethane in Two Holes by Pulsed Wire Discharge for Crack Control of a Concrete Block
    Tanaka S., Nishi M., Yamaguchi M., Bataev I., Hokamoto K.
    Journal of Dynamic Behavior of Materials, Vol. 6, No. 1, pp. 53–63, 2020.
    DOI: 10.1007/s40870-019-00227-6
15. Structure and electrical properties of Ba3TaGa3Si2O14 single crystals grown by Czochralski method
    Usui H., Kusakabe H., Tokuda M., Sugiyama K., Hoshina T., Tsurumi T., Takeda H.
    Journal of the Ceramic Society of Japan, Vol. 128, No. 8, pp. 441–446, 2020.
    DOI: 10.2109/jcersj2.20016
16. Synthesis of Pd-Ru solid-solution nanoparticles by pulsed plasma in liquid method
    Mashimo T., Tamura S., Yamamoto K., Kelgenbaeva Z., Ma W., Tokuda M., Koinuma M., Isobe H., Yoshiasa A.
    RSC Advances, Vol. 10, No. 22, pp. 13232–13236, 2020.
    DOI: 10.1039/c9ra10003b
17. The Tricks of the Chameleon. Unexpected Symmetry of the Diffraction Pattern
    Nespolo M., Tokuda M., Yoshiasa A.
    Crystal Research and Technology, Vol. 55, No. 5, Article 1900063, 2020.
    DOI: 10.1002/crat.201900063

2019

1. Benefits of intermediate-layer formation at the interface of Nb/Cu and Ta/Cu explosive clads
   Parchuri P., Kotegawa S., Yamamoto H., Ito K., Mori A., Hokamoto K.
   Materials and Design, Vol. 166, Article 107610, 2019.
   DOI: 10.1016/j.matdes.2019.107610
2. Compressive behaviour of closed-cell aluminium foam at different strain rates
   Novak N., Vesenjak M., Duarte I., Tanaka S., Hokamoto K., Krstulovíc-Opara L., Guo B., Chen P., Ren Z.
   Materials, Vol. 12, No. 24, p. 40108, 2019.
   DOI: 10.3390/ma12244108
3. Crushing Behavior of Graded Auxetic Structures Built from Inverted Tetrapods under Impact
   Novak N., Borovinšek M., Vesenjak M., Wormser M., Körner C., Tanaka S., Hokamoto K., Ren Z.
   Physica Status Solidi (B) Basic Research, Vol. 256, No. 1, Article 1800040, 2019.
   DOI: 10.1002/pssb.201800040
4. Crystal structure and XANES investigation of petzite, Ag3AuTe2
   Hongu H., Yoshiasa A., Nespolo M., Tobase T., Tokuda M., Sugiyama K.
   Acta Crystallographica Section B: Structural Science, Crystal Engineering and Materials, Vol. 75, No. 2, pp. 273–278, 2019.
   DOI: 10.1107/S2052520619002166
5. Crystal structure, large distortion of the Zn tetrahedron, and statistical displacement of water molecules in skorpionite
   Tobase T., Yoshiasa A., Jinnouchi S., Kitahara G., Hongu H., Tokuda M., Okube M., Sugiyama K.
   Journal of Mineralogical and Petrological Sciences, Vol. 114, No. 4, pp. 178–188, 2019.
   DOI: 10.2465/jmps.180801
6. Crystal structure refinement of MnTe2, MnSe2, and MnS2: Cation-anion and anion-anion bonding distances in pyrite-type structures
   Tokuda M., Yoshiasa A., Mashimo T., Arima H., Hongu H., Tobase T., Nakatsuka A., Sugiyama K.
   Zeitschrift fur Kristallographie - Crystalline Materials, Vol. 234, No. 6, pp. 371–377, 2019.
   DOI: 10.1515/zkri-2018-2134
7. Design and production of pressure vessel for food processing machine using underwater shock using measurement of particle velocity and results of numerical analysis
   Shimojima K., Higa Y., Higa O., Takemoto A., Iyama H., Watanabe T., Kawai H., Hokamoto K., Itoh S.
   International Journal of Multiphysics, Vol. 13, No. 3, pp. 283–293, 2019.
   DOI: 10.21152/1750-9548.13.3.283
8. Effects of a strong gravitational field on Mn-trimers and magnetic properties of hexagonal YMnO 3 single crystal
   Tokuda M., Mashimo T., Ma W., Hayami S., Ando S., Nishiyama T., Yoshiasa A.
   Journal of Physics and Chemistry of Solids, Vol. 129, pp. 172–179, 2019.
   DOI: 10.1016/j.jpcs.2018.12.023
9. Experimental Study for the Tenderness of Meat using Underwater Shock Waves Generation by Wire Electrical Discharges
   Shimojima K., Higa Y., Higa O., Takemoto A., Kawai H., Hokamoto K., Iyama H., Watanabe T., Itoh S.
   Materials Research Proceedings, Vol. 13, pp. 35–40, 2019.
   DOI: 10.21741/9781644900338-6
10. High-efficiency production of large-size few-layer graphene platelets via pulsed discharge of graphite strips
    Gao X., Hiraoka T., Ohmagari S., Tanaka S., Sheng Z., Liu K., Xu M., Chen P., Hokamoto K.
    Nanomaterials, Vol. 9, No. 12, Article 1785, 2019.
    DOI: 10.3390/nano9121785
11. High Strain Rate Behaviour of Auxetic Cellular Structures
    Novak N., Vesenjak M., Tanaka S., Hokamoto K., Guo B., Chen P., Ren Z.
    Materials Research Proceedings, Vol. 13, pp. 25–30, 2019.
    DOI: 10.21741/9781644900338-4
12. Magnesium Alloy Forming using Underwater Shock Wave by Wire Electric Discharge
    Iyama H., Higa Y., Nishi M., Itoh S.
    International Journal of Multiphysics, Vol. 13, No. 3, pp. 269–282, 2019.
    DOI: 10.21152/1750-9548.13.3.269
13. Micropunching large-area metal sheets using underwater shock wave: Experimental study and numerical simulation
    Tanaka S., Bataev I., Nishi M., Balagansky I., Hokamoto K.
    International Journal of Machine Tools and Manufacture, Vol. 147, Article 103457, 2019.
    DOI: 10.1016/j.ijmachtools.2019.103457
14. Natural arsenic with a unique order structure: potential for new quantum materials
    Yoshiasa A., Tokuda M., Misawa M., Shimojo F., Momma K., Miyawaki R., Matsubara S., Nakatsuka A., Sugiyama K.
    Scientific Reports, Vol. 9, No. 1, Article 6275, 2019.
    DOI: 10.1038/s41598-019-42561-8
15. Observation for the High-Speed Oblique Collision of Metals
    Mori A., Tanaka S., Hokamoto K.
    Materials Research Proceedings, Vol. 13, pp. 74–78, 2019.
    DOI: 10.21741/9781644900338-13
16. Preface
    Hokamoto K., Raghukandan K.
    Materials Research Proceedings, Vol. 13, p. v, 2019.
17. Preparation of few-layer graphene by pulsed discharge in graphite micro-flake suspension
    Gao X., Yokota N., Oda H., Tanaka S., Hokamoto K., Chen P., Xu M.
    Crystals, Vol. 9, No. 3, Article 150, 2019.
    DOI: 10.3390/cryst9030150
18. Production of stable bio-emulsion fuel with the use of underwater explosion
    Torii S., Goto K., Tanaka S.
    International Journal of Green Energy, Vol. 16, No. 12, pp. 930–937, 2019.
    DOI: 10.1080/15435075.2019.1650045
19. Risk assessment on explosion experiment and its tasks
    Tanaka S., Kojima Y., Hokamoto K.
    Explosion, Vol. 29, No. 1, pp. 14–19, 2019.
20. The importance of cation-cation repulsion in the zircon-reidite phase transition and radiation-damaged zircon
    Tokuda M., Yoshiasa A., Kojitani H., Hashimoto S., Uehara S., Mashimo T., Tobase T., Akaogi M.
    Mineralogical Magazine, Vol. 83, No. 4, pp. 561–567, 2019.
    DOI: 10.1180/mgm.2019.27
21. Titanian andradite in the Nomo rodingite: Chemistry, crystallography, and reaction relations
    Schmitt A.C., Tokuda M., Yoshiasa A., Nishiyama T.
    Journal of Mineralogical and Petrological Sciences, Vol. 114, No. 3, pp. 111–121, 2019.
    DOI: 10.2465/jmps.180731
22. Towards better understanding of explosive welding by combination of numerical simulation and experimental study
    Bataev I.A., Tanaka S., Zhou Q., Lazurenko D.V., Junior A.M.J., Bataev A.A., Hokamoto K., Mori A., Chen P.
    Materials and Design, Vol. 169, Article 107649, 2019.
    DOI: 10.1016/j.matdes.2019.107649
23. Underwater Explosive Welding of Tin and Aluminium Plates
    Satyanarayan, Tanaka S., Hokamoto K.
    Materials Research Proceedings, Vol. 13, pp. 149–153, 2019.
    DOI: 10.21741/9781644900338-25
24. Underwater shock wave weldability window for Sn-Cu plates
    Satyanarayan, Mori A., Nishi M., Hokamoto K.
    Journal of Materials Processing Technology, Vol. 267, pp. 152–158, 2019.
    DOI: 10.1016/j.jmatprotec.2018.11.044
25. Visualization of shockwave behavior in water and gelatin
    Inao D., Tanaka S., Yamashita T., Hokamoto K.
    Measurement: Journal of the International Measurement Confederation, Vol. 148, Article 106929, 2019.
    DOI: 10.1016/j.measurement.2019.106929
26. Welding window: Comparison of deribas’ and wittman’s approaches and SPH simulation results
    Émurlaeva Y.Y., Bataev I.A., Zhou Q., Lazurenko D.V., Ivanov I.V., Riabinkina P.A., Tanaka S., Chen P.
    Metals, Vol. 9, No. 12, Article 1323, 2019.
    DOI: 10.3390/met9121323

2018

1. Basics of explosive welding process and some examples using underwater shock wave
   Hokamoto K.
   Yosetsu Gakkai Shi/Journal of the Japan Welding Society, Vol. 87, No. 1, pp. 43–47, 2018.
   DOI: 10.2207/jjws.87.43
2. Computational Analysis of the Explosive Compaction Fabrication Process of Cylindrical Uni-directional Porous Copper
   Nishi M., Oshita M., Ulbin M., Vesenjak M., Ren Z., Hokamoto K.
   Metals and Materials International, Vol. 24, No. 5, pp. 1143–1148, 2018.
   DOI: 10.1007/s12540-018-0059-x
3. Fabrication of unidirectional porous-structured aluminum through explosive compaction using cylindrical geometry
   Hokamoto K., Shimomiya K., Nishi M., Krstulović-opara L., Vesenjak M., Ren Z.
   Journal of Materials Processing Technology, Vol. 251, pp. 262–266, 2018.
   DOI: 10.1016/j.jmatprotec.2017.07.022
4. Glass bottle fracture behavior by underwater shock-wave - Effect of micro-bubble on the fracture behavior-
   Ohbuchi Y., Sugahara S., Tanaka S., Enoki S., Hotta G., Sakamoto H.
   Key Engineering Materials, Vol. 774 KEM, pp. 303–306, 2018.
   DOI: 10.4028/www.scientific.net/KEM.774.303
5. Heat transfer characteristics of a gas flow in uni-directional porous copper pipes
   Sato Y., Yuki K., Abe Y., Kibushi R., Unno N., Hokamoto K., Tanaka S., Tomimura T.
   International Heat Transfer Conference, Vol. 2018-August, pp. 8189–8193, 2018.
   DOI: 10.1615/ihtc16.pma.024153
6. Hypervelocity impact phenomena of LPSO-magnesium alloys
   Nishida M., Kodama F., Hayashi K., Akahoshi Y., Hokamoto K., Kawamura Y.
   EPJ Web of Conferences, Vol. 183, Article 02033, 2018.
   DOI: 10.1051/epjconf/201818302033
7. Influence of pressure vessel shape on explosive forming
   Iyama H., Nishi M., Higa Y.
   American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, Vol. 4, 2018.
   DOI: 10.1115/PVP2018-84476
8. Joining of thin plates by high velocity impact welding: Experimental study and SPH simulation
   Emurlaeva Yu.Yu., Bataev I.A., Tanaka S., Ivanov I.V., Tkachenko E.I.
   AIP Conference Proceedings, Vol. 2051, Article 020073, 2018.
   DOI: 10.1063/1.5083316
9. Mechanical behaviour of auxetic cellular structures built from inverted tetrapods at high strain rates
   Novak N., Hokamoto K., Vesenjak M., Ren Z.
   International Journal of Impact Engineering, Vol. 122, pp. 83–90, 2018.
   DOI: 10.1016/j.ijimpeng.2018.08.001
10. One step preparation of Fe–FeO–graphene nanocomposite through pulsed wire discharge
    Gao X., Yokota N., Oda H., Tanaka S., Hokamoto K., Chen P.
    Crystals, Vol. 8, No. 2, Article 104, 2018.
    DOI: 10.3390/cryst8020104
11. Synthesis of metastable cubic tungsten carbides by electrical explosion of tungsten wire in liquid paraffin
    Tanaka S., Bataev I., Oda H., Hokamoto K.
    Advanced Powder Technology, Vol. 29, No. 10, pp. 2447–2455, 2018.
    DOI: 10.1016/j.apt.2018.06.025
12. Synthesis of TiCx Powder via the Underwater Explosion of an Explosive
    Tanaka S., Bataev I., Hamashima H., Tsurui A., Hokamoto K.
    Metals and Materials International, Vol. 24, No. 6, pp. 1327–1332, 2018.
    DOI: 10.1007/s12540-018-0132-5
13. The vanadate garnet Ca2NaCd2V3O12: a single-crystal X-ray diffraction study
    Tokuda M., Yoshiasa A., Mashimo T., Iishi K., Nakatsuka A.
    Acta Crystallographica Section C: Structural Chemistry, Vol. 74, No. 4, pp. 460–464, 2018.
    DOI: 10.1107/S2053229618003741

2017

1. A basic study on shock resistant design for explosion pit
   Yamamoto T., Nishi M., Katayama M., Hokamoto K.
   Materials Science Forum, Vol. 910 MSF, pp. 84–89, 2017.
   DOI: 10.4028/www.scientific.net/MSF.910.84
2. Basic research on explosive forming of magnesium alloy plate
   Nishi M., Sakaguchi H., Iyama H., Ruan L., Fujita M.
   Materials Science Forum, Vol. 910 MSF, pp. 90–95, 2017.
   DOI: 10.4028/www.scientific.net/MSF.910.90
3. Change in crystal structure and physical properties of the Multiferroics YMnO3 single crystals by Strong gravitational field
   Tokuda M., Weijian M., Hayami S., Yoshiasa A., Mashimo T.
   Journal of Physics: Conference Series, Vol. 807, No. 7, Article 072001, 2017.
   DOI: 10.1088/1742-6596/807/7/072001
4. Development of a DC −1 MV insulating transformer for neutral beam injectors
   Watanabe K., Yamanaka H., Maejima T., Kashiwagi M., Tobari H., Inoue T., Hanada M., Tanaka S., Yamaguchi K., Kadowaki M.
   IEEJ Transactions on Electrical and Electronic Engineering, Vol. 12, No. 2, pp. 214–220, 2017.
   DOI: 10.1002/tee.22368
5. Effect of process parameters on microstructural and mechanical properties of Ti−SS 304L explosive cladding
   Somasundaram S., Krishnamurthy R., Kazuyuki H.
   Journal of Central South University, Vol. 24, No. 6, pp. 1245–1251, 2017.
   DOI: 10.1007/s11771-017-3528-3
6. Ejecta from LPSO-Type Magnesium Alloy Targets in Hypervelocity Impact Experiments
   Nishida M., Kodama F., Hayashi K., Akahoshi Y., Hokamoto K., Mayama T., Yamasaki M., Kawamura Y.
   Procedia Engineering, Vol. 204, pp. 270–275, 2017.
   DOI: 10.1016/j.proeng.2017.09.735
7. Experimental study and computational simulation for shock characteristics estimation of okinawa's soils "jahgaru"
   Higa Y., Iyama H., Shimojima K., Nishi M., Itoh S.
   International Journal of Multiphysics, Vol. 11, No. 3, pp. 245–253, 2017.
8. Experimental verification of the softening of the pork using underwater shock waves generated by wire electrical discharges
   Shimojima K., Higa O., Higa Y., Takemoto A., Iyama H., Yasuda A., Watanabe T., Tanaka S., Fukami R., Vesenjak M., Ren Z., Itoh S.
   Materials Science Forum, Vol. 910 MSF, pp. 176–179, 2017.
   DOI: 10.4028/www.scientific.net/MSF.910.176
9. High cooling rates and metastable phases at the interfaces of explosively welded materials
   Bataev I.A., Lazurenko D.V., Tanaka S., Hokamoto K., Bataev A.A., Guo Y., Jorge A.M., Jr.
   Acta Materialia, Vol. 135, pp. 277–289, 2017.
   DOI: 10.1016/j.actamat.2017.06.038
10. Lip Formation and Ejecta from LPSO-type Magnesium Alloy Plates in Hypervelocity Impact
    Nishida M., Ishida K., Kodama F., Hayashi K., Akahoshi Y., Hokamoto K., Mayama T., Yamasaki M., Kawamura Y.
    Procedia Engineering, Vol. 173, pp. 65–72, 2017.
    DOI: 10.1016/j.proeng.2016.12.024
11. Numerical simulation of explosive forming using detonating fuse
    Iyama H., Higa Y., Nishi M., Itoh S.
    International Journal of Multiphysics, Vol. 11, No. 3, pp. 233–244, 2017.
12. Optical observation of metal jet generated by high speed inclined collision
    Mori A., Tanaka S., Hokamoto K.
    Proceedings of SPIE - The International Society for Optical Engineering, Vol. 10328, Article 103281Q, 2017.
    DOI: 10.1117/12.2270473
13. Preface
    Chen P.W., Hokamoto K.
    Materials Science Forum, Vol. 910 MSF, p. iv, 2017.
14. Structure of Single-Crystal Rutile (TiO2) Prepared by High-Temperature Ultracentrifugation
    Mashimo T., Bagum R., Ogata Y., Tokuda M., Okube M., Sugiyama K., Kinemuchi Y., Isobe H., Yoshiasa A.
    Crystal Growth and Design, Vol. 17, No. 4, pp. 1460–1464, 2017.
    DOI: 10.1021/acs.cgd.6b01818
15. Surface coating by tungsten carbide particles on a metal substrate by high velocity collision
    Tanaka S., Mori A., Oda H., Inao D., Hokamoto K.
    Science and Technology of Energetic Materials, Vol. 78, No. 3-4, pp. 93–98, 2017.
16. Underwater shockwave pretreatment process for improving carotenoid content and yield of extracted carrot (Daucus carota L.) juice
    Yasuda A., Kuraya E., Touyama A., Higa O., Hokamoto K., Itoh S.
    Journal of Food Engineering, Vol. 211, pp. 15–21, 2017.
    DOI: 10.1016/j.jfoodeng.2017.04.026
17. Using underwater shockwaves for the development of processing devices for plant materials
    Yasuda A., Higa O., Kuraya E., Higa Y., Shimojima K., Hokamoto K., Itoh S.
    Materials Science Forum, Vol. 910 MSF, pp. 169–175, 2017.
    DOI: 10.4028/www.scientific.net/MSF.910.169
18. Welding of Sn and Cu plates using controlled underwater shock wave
    Narayan S., Tanaka S., Mori A., Hokamoto K.
    Journal of Materials Processing Technology, Vol. 245, pp. 300–308, 2017.
    DOI: 10.1016/j.jmatprotec.2017.02.030

2016

1. Effect of strong gravitational field on oriented crystalline perovskite-type manganese oxide La1−xSrxMnO3
   Tokuda M., Mashimo T., Khandaker J.I., Ogata Y., Mine Y., Hayami S., Yoshiasa A.
   Journal of Materials Science, Vol. 51, No. 17, pp. 7899–7906, 2016.
   DOI: 10.1007/s10853-016-0045-y
2. Fifth international symposium on explosion, shock wave and high-strain-rate phenomena (ESHP 2016)
   Tanaka S.
   EXPLOSION, Vol. 26, No. 3, pp. 216–219, 2016.
3. Improved microstructure and mechanical properties of dissimilar explosive cladding by means of interlayer technique
   Saravanan S., Raghukandan K., Hokamoto K.
   Archives of Civil and Mechanical Engineering, Vol. 16, No. 4, pp. 563–568, 2016.
   DOI: 10.1016/j.acme.2016.03.009
4. Influence of Sedimentation of Atoms on Structural and Thermoelectric Properties of Bi-Sb Alloys
   Januszko K., Stabrawa A., Ogata Y., Tokuda M., Khandaker J.I., Wojciechowski K., Mashimo T.
   Journal of Electronic Materials, Vol. 45, No. 3, pp. 1947–1955, 2016.
   DOI: 10.1007/s11664-015-4307-2
5. Mechanical and microstructural analysis of unidirectional porous (UniPore) copper
   Vesenjak M., Hokamoto K., Sakamoto M., Nishi T., Krstulović-Opara L., Ren Z.
   Materials and Design, Vol. 90, pp. 867–880, 2016.
   DOI: 10.1016/j.matdes.2015.11.038
6. Numerical simulation on manufacturing of pressure vessel for shock food processing using explosive forming
   Iyama H., Nishi M., Higa Y., Shimojima K., Higa O., Itoh S.
   American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, Vol. 4, Article V004T04A009, 2016.
   DOI: 10.1115/PVP2016-64020
7. Optical examination of shockwave propagation induced by an underwater wire explosion
   Higa O., Yasuda A., Higa Y., Shimojima K., Hokamoto K., Itoh S.
   International Journal of Multiphysics, Vol. 10, No. 4, pp. 343–354, 2016.
8. Uni-directional porous metal fabricated by rolling of copper sheet and explosive compaction
   Vesenjak M., Hokamoto K., Matsumoto S., Marumo Y., Ren Z.
   Materials Letters, Vol. 170, pp. 39–43, 2016.
   DOI: 10.1016/j.matlet.2016.01.143